บ้าน> ผลิตภัณฑ์> ระบบโพลียูรีเทนสำหรับรองเท้า แต่เพียงผู้เดียว> ระบบโพลียูรีเทนสำหรับรองเท้าแตะและรองเท้าแตะ> การหล่อโพลียูรีเทนเรซินสำหรับรองเท้าพื้นรองเท้ากลางรองเท้า
การหล่อโพลียูรีเทนเรซินสำหรับรองเท้าพื้นรองเท้ากลางรองเท้า
การหล่อโพลียูรีเทนเรซินสำหรับรองเท้าพื้นรองเท้ากลางรองเท้า
การหล่อโพลียูรีเทนเรซินสำหรับรองเท้าพื้นรองเท้ากลางรองเท้า
การหล่อโพลียูรีเทนเรซินสำหรับรองเท้าพื้นรองเท้ากลางรองเท้า
การหล่อโพลียูรีเทนเรซินสำหรับรองเท้าพื้นรองเท้ากลางรองเท้า
การหล่อโพลียูรีเทนเรซินสำหรับรองเท้าพื้นรองเท้ากลางรองเท้า
การหล่อโพลียูรีเทนเรซินสำหรับรองเท้าพื้นรองเท้ากลางรองเท้า

การหล่อโพลียูรีเทนเรซินสำหรับรองเท้าพื้นรองเท้ากลางรองเท้า

รับราคาล่าสุด
ชนิดการชำระเงิน:L/C,T/T,D/P
Incoterm:FOB,CFR,CIF
สั่งขั้นต่ำ:1000 Kilogram
การเดินทาง:Ocean
ท่าเรือ:Shanghai
คุณสมบัติของผ...

หมายเลขรุ่นA-2001/B-8580

แบรนด์สารเคมี Xuchuan

สถานที่กำเนิดประเทศจีน

ชนิดของเรซินสังเคราะห์และพลาสติก

ApplicationInsole and low density mid-sole

CharacteristicGood handle, low density and good dimension stability, high elasticity

AppearanceLiquid

BrandXuchuan

CodeA-2001/B-8580

บรรจุภัณฑ์ และ...
หน่วยงาน ที่ขาย : Kilogram
ชนิดของแพคเกจ : 20 & 225kg/drum
ตัวอย่างรูปภาพ :
คำอธิบายผลิตภ...


Polyol isocyanate สำหรับ mid-sole

การหล่อโพลียูรีเทนเรซินสำหรับรองเท้าพื้นรองเท้ากลางรองเท้า

สารเคมี PU แต่เพียงผู้เดียว


รองเท้าเรซินโพลียูรีเทน แต่เพียงผู้เดียว

รายละเอียดผลิตภัณฑ์

Application shoes insole
A/B Materials Temperatures (℃) 40~45/38~42
A+C/B Mix ratio (By weight) 100/74~76
Cream Time (s) 7~9
End of Rise Time (s) 50~60
Free Rise Foam Density(g/cm3) 0.13~0.16
Mold Temperature (℃) 45~55
Molded Density (g/cm3) 0.30~0.40
Hardness (Shore C ) 35~45
Tensile strength(MPa) Tensile strength(MPa)

Characteristic: Good handle, low density and good dimension stability, high elasticity

Application: Insole and low density mid-sole

Typical properties of PU matrix

Name of products

Appearance

Viscosity (mPa·s/40)

Density 

(g·cm-3/40)

Package(kg)

/

A-2001

Liquid

1000~1400

1.01~1.02

18

B-8580

Yellowish transparent liquid or waxy

600~1000

1.08~1.2

20

Materials preheat

A-2001:  preheated at 50~60 for 8~10 hours.  

B-8580:  preheated at 50~60 for 8~12 hours.

Typical processing parameters & Reaction parameter

Items

A/B Materials Temperatures
(℃)

A+C/B Mix ratio
(By weight)

Cream Time (s)

End of Rise Time (s)

Free Rise Foam Density(g/cm3)

Mold Temperature
(℃)

Demold Time(min)

Parameter

40~45/38~42

100/74~76

7~9

50~60

0.13~0.16

45~55

4~5

The adding content of C-2 should be 300g±20g/18kg.

The adding content of water should be 0~90g/18kg according to the reality.

Physical properties

Items

Molded Density (g/cm3)

Hardness
(Shore C )

Tensile strength(MPa)

Elongation (%)

Tear Strength
(kN/m)

/

Physical  properties

0.30~0.40

35~45

4.0~6.0

300~380

18~26

Demold time may be prolonged with the increase of sole thickness

These physical data are acquired by testing a sample of 6mm thick.

Data listed above are just for reference. The detail data are subjected to practical production. If other requests for physical properties, please contact us.


ภาพรวมของ บริษัท

company company

Xuchuan Chemical ก่อตั้งขึ้นในปี 2550 บริษัท จดทะเบียนของ บริษัท อยู่ที่ 500 ล้านหยวน ผลิตภัณฑ์หลักคือโพลีออลโพลีเอสเตอร์ทั้งหมด, เรซินโพลียูรีเทนสำหรับรองเท้า, เรซินโพลียูรีเทนที่ใช้น้ำและตัวทำละลายสำหรับหนังเทียม, กาวพันธะโพลียูรีเทนและกาวละลายร้อนโพลียูรีเทน

ตอนนี้ Xuchuan มีฐานการผลิตที่ทันสมัย ​​4 แห่งกำลังการผลิตสูงถึง 630,000 ตันต่อปีผลิตภัณฑ์ที่ส่งออกไปยัง 32 ประเทศและภูมิภาคต่างๆในโลก

การประชุมเชิงปฏิบัติการ
ใบรับรอง
นิทรรศการ
แผนก R&D
ลูกค้าสหกรณ์
การบรรจุและการจัดส่ง


คำถามที่พบบ่อย
สินค้าร้อน
ติดต่อเรา
ติดต่อตอนนี้
ส่งคำถาม
*
*

We will contact you immediately

Fill in more information so that we can get in touch with you faster

Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.

ส่ง